Fun Wiring Two Single Pole Switches

A 2 wire feed is pulled from the nearest source of power like a receptacle or the panel to the switch.

Wiring two single pole switches. Connect one wire to the first switch in the box and the second wire to the other switch and connect the black wire from each of the lights to the other terminal on its respective switch. Wire the new single pole switch. Featuring wiring diagrams for single pole wall switches commonly used in the home.

The white or neutral wires bypass the switch so the one coming from the power source and the one from the light get spliced and capped in the box. If you mix them up the switch won t work and could be dangerous. Though it is not difficult to wire a double switch careful attention to safety is crucial to prevent injury.

Bend the end into a loop using the wire strippers or needle nose pliers. To wire a double switch you ll need to cut the power remove the old switch then feed and connect the wires into the double switch fixture. If both the light and fan are power by the same circuit then a single pole switch will do.

Level beginner description power a hot and a neutral is fed to the switch with 1 switch leg run from the switch to 1 light. For example you might want to turn on a bathroom light separately from the ceiling fan. Double switches sometimes called double pole allow you to separately control the power being sent to multiple places from the same switch.

If the wire end is in poor condition trim off the bare end. It should have about 1 2 inch of bare wire at the end and should be formed into a hook like loop. Cover the two single pole light switch device with an outlet cover plate.

Fixture wiring exits the switch box. For the 3 and 4 way switches two 3 ways switches are requires when there are two different location to turn on one light fixture but when there are three or more locations each additional location beyond those first two require a 4 way switch. The switch has an on and off markings with the toggle being pushed up to turn the light on and pushed down to turn the light off.